Pedersen Assesories | Pedersen framesizes |   Pedersen priceslist | History | Historie | Pedersen-gathering | Pedersenpeople | back |

 


Pedersencykel med Nexus 8 gear med rullebremser for og bag, samt "Knagsted" styr og Tubus Fly Bagagebærer. Model fra 2007/2008.

8 speed Nexus internal gears with Rollerbrakes front and rear. "Knagsted" handlebar and Tubus Fly rearcarrier. Model from 2007.

WHY CHOOSE A PEDERSEN BICYCLE

The timeless design an high craftsmanship of the Pedersenbike makes it attractive and useful. On the "Pedersen" you have an upright riding position, which gives a better view of the traffic. The hammock-saddle of the bike gives a comfortable ride, which is to the advantage of people with back troble.

clik on pedersen for bigger picture

9 speed Megarence, XT rearshift,Maviccxp33 rims, Tubus fly rearcarrier,size RL

clik on pedersen for bigger picture

9 speed with woodenrims and fenders, and rollerbrake front and rear

klik for at se stor model
8 speed megarence/mavic cxp33 rims, tubus rearcarrier, size RL



          DESIGN

To obtain the maximum amount of lateral rigidity the cycle is designed as a series of triangles. Each triagle is arranged to absorb the principal stresses at its apex.  The result is that all tubes in the frame are subjected  only to compressior stress. The hammock type saddle  is suspended between two apices of the triangular frame.

The Pedersenbicycle was invented by the Danish engineer Mikael Pedersen (1855 - 1929). In 1978 the  Blacksmith Jesper Sølling found the description of the then forgotten bicycle and restarted the production.

 

klik for at se stor model
8 speed Alivio, Woodenfenders

 

 

klik for at se stor model

7 speed with costerbrake from shimano nexus, fronthub dynamo/shimano nexus, and tubus fly rearcarrier

ny 3 gears pedersencykel med Tubus Cargo bagbegaebærer, d. 25 februar 2004

3 speed with tubus cargo rearcarrier

 

klik for at se stor model

8x3 speed sram system

 

 

klik for at se stor model

7 speed with rollerbrake,and dynamosystem from shimano nexus

 

The Pedersenbicycle was invented by the Danish engineer Mikael Pedersen (1855 - 1929). In 1978 the Blacksmith Jesper Sølling found the description of the then forgotten bicycle and restarted the production.
| History | Historie | Tilbage |

FRAME DECLARATION: 

Tubing: 25 CrMO4 14,00 x 0,80 Columbus Italy. Brazed with L - CuNi 1 On42 - 650 N/mm2

klik for at se stor model

Pedersen Assesories | Pedersen framesizes |   Pedersen priceslist | History | Historie | Pedersen-gathering | Pedersenpeople | Tilbage/back